Case for WAVGAT / ATGM332D Mini GPS Module

This is a custom-designed enclosure for the WAVGAT / ATGM332D Mini GPS modules commonly found on electronics marketplaces. It features a compact design with a snap-fit lid, ensuring your module is protected and cool while remaining accessible.

Key Features:

• Precise Cutouts: Includes a 6.5mm square cutout for the SMA antenna connector and a slot for the 5-pin header.
• Ventilation: Honeycomb pattern on both the top and bottom to ensure airflow and prevent heat buildup.
• Internal Clearance: Designed with 7mm standoffs and 7mm top clearance to accommodate components.
• Snap-Fit Design: The lid snaps securely into place without the need for screws or glue.
• Parametric: OpenSCAD source file included if you need to adjust tolerances or dimensions.

Print Instructions (Prusa i3 MK3S+)

This model is optimized for printing on the Prusa i3 MK3S+. No supports are required as the bridging for the cutouts is minimal.

• Material: Prusament PLA
• Layer Height: 0.15mm QUALITY
• Infill: 20%
• Infill Pattern: Grid
• Supports: None

Retraction Settings:

• Extruder 1 Retraction Length: 1.8 mm
• Extruder 1 Retraction Speed: 50 mm/s