simple Disc golf glow charger - LED UV/reg. light strip 5V - cut to length

It works with LED stipes of 8mm width by 70mm long and up. Thickness can be from 1mm to 4-5mm. The ring in 3 parts snaps in place (you can glue it with contact (ca) glue). Also the optionnal clips allows to secure the usb cable and extra length (my strip is 100mm and I did not want to cut it down to 70mm). (*edit: its easier to just cut the strip to the desired length), You can use any 5v (easy with PD phone and camera chargers) LED strip that are 8mm wide and 2mm thick. I printed it in PETG

Print settings

Nozzle size ......................... 0.4 mm

Layer height ....................... 0.2

Number of perimeters ... 2 (or more)

Infill ...................................... 15% (or more)

Supports ............................. yes

Bed surface ......................................... glue stick + brim (if PLA)

Hotend temp ...................................... 240c / 210

bed temp .............................................. 80c / 60

Materials used: .................................. PETG / PLA

Additionnal parts

LED strip 8mm wide x 2mm thick x 700mm long

Glowing disc and power source