Lighting Stand add-on for Flash/Speedlight

Add on to attach a speedlight to a Lighting Stand, like Manfrotto

I made 2 versions, one sigle/vertical, double with vertical and horizontal hot shoe attachment.

To secure it to the lighting stand, an M4 bolt is necessary. You can print the nut&bolt version or the  M4S Threaded Insert.

Recommended Material: PETG.

Recommended print settings:

• Layer height: 0.15 mm
• Perimeters: 3
• Upper and Bottom Solid Layers: 5
• Infill: 20%
• Infill pattern: Grid
• Brim: Optional
• NO SUPPORT

Print as G-code example, for the nut&bolt version, you'll find a little membrane for support, it will break as soon as you insert the bolt inside.