Wuerth Abrasive Disc Holder and Alignment Aid

Würth Abrasive Disc Holder and Alignment Aid

Introducing the Würth Abrasive Disc Holder and Alignment Aid – for a better (looking) work flow!

Storing all your abrasives neatly and easily accessible has never been easier. 
Grab the right grid every time thanks to the clever swapable signs. 
Thanks to the alignment pins on the tray, putting a new pad on the sander goes from annoying and finicky to something you don't even have to think about!
Stack them with the ingenious screw design and either clamp them directly to your table or fasten them on your wall, WAPS or perforated plate system.
Optimized for printability and rigorously tested, ensuring the best performance for everyone.

The alignment pins on the Tray are compatible with 125mm and 150mm Würth sandpaper discs with perforations. Find them here

Did you know that Würth also sells 3D Printers and Accessories? Find it here

With Würth you can not just buy Filament, but also Prusa 3D-Printers and all the accessories you could possibly need, including tools such as scrapers and pliers, Spare printer parts, solutions for bed adhesion and much more! 

Want to learn more about 3D-Printing with Würth? Check out our website wuerth.de/3dp

Printing

Please be advised that optimal results can only be achieved by adhering to our tested and verified printing parameters, as follows:

• Material: Würth PETG (e.g. Art.-no. 4954633200 )
• Infill: 20% Gyroid (Rectiliniar for Holder)
• Wall lines: 4  (6 for Wall Holder)
• Support: Only for the Holder Cantilever, pay attention that no supports generate in threads
• Orientation: Wall mount with vertical threads; screw laying on the flat side
• Layer height: 0.2 mm
• Brims: Not needed

Assembly

1. Stack modules:
     – Insert screw into first holder
     – leaving ~ 2mm gap screw into second holder
     – twist one holder to tighten the assembly
2. Push signs into holder and tray slots
3. Load tray with abrasive discs
4. Clamp to table with screw, or mount on wall, WAPS or perforated plates using provided accessoires

Tipp: Store remaining discs under the tray in the holder
 

COMPANY PORTRAIT ADOLF WÜRTH GmbH & Co. KG

The Würth Group is a leader in the development, manufacturing, and distribution of assembly and fastening materials. In addition, trading and production companies, known as Allied Companies, operate in related business sectors such as electrical wholesale, electronics, and financial services. In 80 countries, the Group currently employs more than 87,000 people worldwide across over 400 companies with more than 2,800 branches. In the 2024 fiscal year, the Group achieved annual sales of €20.2 billion. With over 8,000 employees, Adolf Würth GmbH & Co. KG in Künzelsau is the largest individual company within the Würth Group.

wuerth.com

Facebook	Instagram	Linkedin	Youtube

Liability Disclaimer

By downloading the provided 3D printing data, the user acknowledges and agrees that it will be used solely in accordance with the specified printing parameters and assumes all associated risks. Würth disclaims any and all liability for personal injury, property damage, or any other harm that may result from the use or misuse of the provided data. The user accepts full responsibility for any consequences arising from its use.