Another Magic The Gathering (MTG) deck box/card tray

I got the inspiration from lgilmon's MTG Deck Box, and tried to create a similar in openscad: The box can be used as…
111
401
2
5389
updated December 21, 2019

Description

PDF

I got the inspiration from lgilmon's MTG Deck Box, and tried to create a similar in openscad:

The box can be used as card tray:

  • It have magnets in the side, and on the top to keep it together. (the four d=5x2 magnets is enough, can lift the full deck without fall the bottom)
  • It have background graphics inside the tray
    In the scad you can customize:

  • card sizes (if you use protector and/or use larger deck

  • magnets size
  • wall thickness
  • logo (1-5 mana logo, each number have own logo sizes and placements)
  • color change print or not (the logo has different depth)
  • layer height ( for one color. different between two logo depth is one "layer height")
    This (the stl) if for cards 65 91, and a 60 cards deck (this for the "G protect card sleeves"), 5 mana logo, each own depth (color change print), and for 52 magnets, and 0.4mm layer (not printing layer)

    (the mana logos from mechpilotz's STAINLESS MTG MANA TOKENS, the background logos created from icons)

Print instructions

Category: Toy & Game Accessories Print Settings

Filament: bq pla ash grey, grass green, white, black, ruby red, sky blue
Notes:

color change:
after

  • 0.8 (2 layer height) => white
  • 1.2 (+1 one layer height) => green
  • 1.6 (+1 one layer height) => blue
  • 2 (+1 one layer height) => red
  • 2.4 (+1 one layer height) => black
  • 2.8 (+1 one layer height) => back to original

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License