GameCube Backplate & Flippy Drive Micro SD Card Extender

For printing the model, I would recommend organic support. You don't need it for the vent grills, so you may want to manually paint it. Otherwise Everywhere should work in Prusaslicer.

If you are printing the MicroSD Card slot. The screw holes are designed for M2 screws and threaded inserts, or M3 Screws without. I wouldn't recommend M3 as it's too big for the MicroSD Card adapter I used. You'll also need to print the updated Bracket to ensure that the MicroSD Card extender can reach the Flippy Drive

For the MicroSD Card extender I used this one from Amazon: https://www.amazon.ca/dp/B09CKRDFTH

UCTRONICS Micro SD Male to Female Flexible Extender, 15cm/5.9in

NOTE: I do not have a DOL-001 the size for the Digital and Analog out is based on the cutouts on my DOL-101. If there needs to be adjustments please let me know or update the CAD files here: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/Misc/Flippy%20Drive