v2 Skadis Magnetic Olight Warrior Mini Holder T-nut

Skadis T-Nuts Mounting System for Ikea Skadis Pegboards made by @6d6178  You can get the needed T-Nuts from the original project here: https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards

Instructions:
First, you’ll need to print the file for the M2 T-Nut (linked above). Print at least two of them.
You will also need two M2 × 16 screws and two M2 nuts.
and a little 8mm diameter 3mm thickness magnet.

Printing Instructions:
Print with no supports. Use a 0.2 mm layer height or finer for best fit and finish.
I printed mine in translucent gray PETG 

Assemble it like this:

If you want to support me, feel free to share this project or leave a comment!
You can also DM me if you have any questions or run into any issues.
buy me a coffee : https://buymeacoffee.com/bob_l