Festool shopvac to Bosch tools adapter

This thingy connects a Bosch PEX 400 AE orbital sander to a Festool shopvac hose. The adapters aren't strict to that particular devices. Other tools and vacuums could be compatible. Check pictures for reference.

Print instructions

• print with the vaccum side on the bottom
• depending how well your material adhere on the build plate you have to use a brim
• PLA works good for that, PETg, a hard TPU might be a better choice … (let me know through the comments what material you use and how it performs)
• 3 Perimeters
• 20% honeycomb infill

see also my other shopvac adapters:

• https://www.prusaprinters.org/prints/146761-bosch-pex-to-siemens-vac-adapter
• https://www.prusaprinters.org/prints/118188-metabo-jigsaw-to-siemens-vac-adapter

updates

22.08.2022 add a v2 with thicker walls and fixed stl export. before it had empty layers. Add new cover photo sponsored by TiNi

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.

festool part of the adapter is more ore less the same, the bosch adapter side is made by me