ELEGOO Resin Filter Retainer / Holder

🐢 ELEGOO Filters work remarkably well. Incredible actually.  We use them on an Elegoo Saturn however they may fit your SLA printer as well. That being said, we needed a way to streamline their use.  Knocking them into the Vat pre or post print was a risk. Matter of WHEN not if.  These holders save you from aligning them every print and eliminate the Vat Dunk Danger. Held in place by double sided tape.  PLA is sufficient and small strips of 3m double sided tape will do fine. The filters are held securely but there is enough clearance to remove for charging.        

PS: Dibs on Vat Dunk Danger for my garage band name. \m/__(>.<)__\m/

Techie Details:

Printer: OG Prusa Mini+

PLA: Printed Solid JESSIE PLA 3DPN VANILLA BEAN ICE CREAM

FOR SATURN COVER SPECIFIC: Mounted 75MM from the covers side & 50.4 from the bottom. Recommend using painters tape as an alignment aid. 

Print Settings .20MM Quality, Prusament PLA profile, Supports-Everywhere, 50% infill, Brim=YES. Print time-3:57 ea. (Long time but Worth it to prevent the dreaded Vat Dunk Danger )