ULTIMATE mobile/LAN design for Qube 540

This is a focused and improved set tying together my previous designs and an extra swivel mount to the perfect combination to take your PC on your next LAN.

This set consists of a monitor mount, a swivel mount with VESA compatibility, a keyboard holder and a box.

I will explain the different parts and their usage in the following:

Monitor Mount
This mount can be utilised by hanging the hooks into the wanted holes of the Qube 540 case. 
You can safely lock its position by turning the levers. This pushes the plugs into two holes so that the mount isnt able to move anymore.
The adapter brackets for the individual monitors can then be screwed to the front.
You can either use the swivel mount or use another fitting mounitng bracket that you may find.

Swivel Mount
A swivel mount is the connector between the monitor itself and the monitor mount that ist mounted onto the case.
You simply hold it infront of the heat set inserts and screw it in with four M5x16 screws of your preferred type.
I have added a front plate that is compatible with VESA 75x75 and 100x100 which are used with most PC monitors.
The angle of your monitor can be adjusted by loosening the wing screws, tilting the monitor up or down and tightening the screws again.

Mouse & Cable Box
This box holds your mouse and cables for transport with a magnetic lid.
I have included an inner separating wall that can be placed into one of three positions to fit your mouse as best as possible.
The Box can just be pressed into the holes on top of the Qube 540 case.

Keyboard Holder
This keyboard holder can be used by printing the part four times.
Just choose the needed distances for your keyboard and place two parts opposing eachother. Then add a flexible strap or velcro to tightly hold your keyboard for transport.
The keyboard gets lifted high enough so that you wont have any collisions with the monitor mount.

I hope you enjoy these designs. Any constructive feedback is greatly appreciated.