🚗🥤 Self-Levelling Cup Holder for car mount.

Info:

• inspired by great gyroscopic model from @phi.gl for stroller,  I wanted to have it in the car :) Thanks for originil print!
• I used this ventilation connector shape from print by @icepick Designs (thank you too)
• I designed car vent mounts in the way, that the original stroller model print can be used also in the car (so you can reuse it, if you want it in the car and not on stroller anymore)

Variants of gyro circles:

• I have here exact original gyroscopic circle with inner diameter 7.5cm (small hole)
• then i remixed it, so the hole is bigger (8cm)
  • then, if anyone needs that, i modelled also 2 adapters:
    • from 8cm to 7.75cm
    • from 8cm to 7.5cm
  • so it is probably more convenient to print 8cm gyro circles variant and possibly print also 8cm to 7.5cm adapter, it is better than printing both huge gyro circles.

Dimensions summary:

• gyro circles variants: 
  1. inner diameter 7.5cm (same as original) - small
     • for smaller cups like Starbucks coffee
  2. inner diameter 8cm - bigger
     • for this diameter you can print optionally also reducing adapter, 2 variants of them (just clip on the 8cm hole gyro circles):
       1. 8cm to 7.5cm
       2. 8cm to 7.75cm

Vent system mounting connectors:

• there are many cars, many shapes, many angles of vent system, so I have attached few models of mounts
• measure your car and try to pick correct one for you

Print instructions:

• see 3mf files
  • basically recommending PETG, 5 diameters 

Assembly:

• you need two M3 screws, at least 18mm (those will be hidden completly inside)
  • you can still use 20mm or longer screws (the longer, the more will be visible on the other side)

Warning:

• check if your vent system can really hold heavy drink! 
  • So you do not break your vent system ledge!
• be careful while driving & drinking your non-alcoholic beverage

Happy printing and driving!