NR200 x MSI Ventus deshroud mod (Generic 120mm Fan Version)

TLDR

1. Deshroud mod for the MSI Ventus 3080/3080Ti/3090 in the Coolermaster NR200 case
2. Fan shrouds designed to fit any standard 120mm x 25mm computer fans and bridge the gap between the fan and the GPU heatsink
3. Fan shrouds can be mounted to the fans using standard case fan screws
4. Special versions of the mod also available for the Noctua NF Series (NF-A/S/F12) and the Arctic P12

Notes

MSI Ventus 3080 only?

Yes and no. Yes because this is designed to hug the Ventus' heatsink as snugly as possible, so unless other cards are of the exact same height post de-shroud, this would either be too tall / short. On the other hand, the ventus 3080, 3080Ti & 3090 from MSI all shares the same cooler so technically this also supports the Ventus 3080Ti & the 3090.

Fan compatibility?

The fan shrouds should be compatible with most 120mm case fans as long as they use the same mounting pattern & is 25mm in height. If you have a Noctua NF Series (NF-A/S/F12) fan or an Arctic P12, I've made special versions of this mod for those fans that fits & looks better!

Have the shrouds been printed / tested?

Not this particular model, however I've printed the Noctua & Arctic versions which have exactly the same mounting pattern & dimensions so this should work as well.

Like, download and visit my Patreon!

Have nice day!

Fan model used in rendering by Anton Tsaritsynskyy
Heatsink model used in rendering by HDRI (Adapted)