Double Shear for Y motor mk4/s

No idea how much difference will it make, but its kinda popular mod for other printers so i made it for my mk4s too.

hw needed;

2-3x m3x25 din912 screw (same type as original, just 7mm longer)

1x 0.5mm shim (i used https://www.aliexpress.com/item/1005009420795456.html?spm=a2g0o.order_detail.order_detail_item.2.7141f19cA6Lg8J ) to be placed between bearing and pulley.

1x F695-2RS bearing (i used https://www.aliexpress.com/item/1005008467546575.html?spm=a2g0o.order_detail.order_detail_item.3.1327f19cHxRAoT )

i personally printed for mself “y-motor-holder-R3 - support bearing.stl”

idea of “y-motor-holder-R3 - support bearing _easy” is to be able to keep one screw on the motor during the instalation so it should be easier.

“y-motor-holder-R3 - whole part” is a whole part.

print with default settings for prusa parts.

support bearing for Y motor