3" Planter Tray – Smooth Finish Print

Designed to match the footprint of the Gathering Moss 3" planter, this drip tray fits snugly while maintaining a clean, modern look. It’s watertight, stackable, and prints beautifully with either PLA or PETG.

Material Options:

• PLA build + PETG interface supports – best for fast, smooth prints with a glossy base finish and crisp edges.
• PETG-HF build + PLA interface – ideal for higher-temperature or outdoor use, still keeping that injection-molded surface from the PLA interface layer.

Recommended Settings (Bambu printers):

• Nozzle: 0.4 mm Layer height: 0.2 mm Infill: 15–20 % (grid or gyroid)
• 5 top / 5 bottom layers for watertightness
• Ironing ON for the top surface
• Smooth build plate (textured optional for matte finish)
• Supports ON → “Support Interface Only” with 2 interface layers

Features:

• Tight tolerance fit with GM Planter bottom
• Slight outer lip prevents overflow and strengthens edges
• Shallow angle sides for easy nesting / stacking
• Compatible with standard 1020 nursery trays

Notes:
This design was tested on multiple Bambu printers using both material setups.