Picture hanger clips - 7 minutes print

Hello everybody!

I've always wanted one of those hanging picture setups in my room and as a maker i thought this was the perfect occasion to print one!

Printing:

The print itself is really easy, it only takes seven minutes for a couple to be printed, but you can print as many as you want to hang multiple pictures.

I suggest printing with only one vertical wall to avoid bulking due to the thickness of the wall.

I used 20% rectilinear infill for the print and a 0.4 nozzle at 0.2 mm layer height, but any nozzle and layer height should do the job, as long as you manage to keep dimensional accuracy.

Assembly:

For the assembly you will need a string, any king should be good if it fits, i used a jute one which looks good to me and has some texture, but you can also use fishing wireto have a floating effect.

You can tie your string to a nail or to any feature offered by the wall/bed/wardrobe etc…

If you have any doubt just look at the picture.

The gap is 0.15 mm wide, if you find it a bit tight try spreading it with a pencil, just don't exaggerate.

Hope everything is clear,

Have fun and make it simple!

Vittorio