Trinity V1 Inverted Electronics Mod Remixed Parts

Modification of the Trinity V1 inverted electronics mod.  The two color options are still there, though I did not print it.  I printed the deck panels in PETG, on a Neptune 3 max, 0.6mm nozzle, 0.3 mm layer height, 4 top and bottom shells, 25% infill.  The base panel uses m3 heatset inserts, which, to mount the DIN rail to, I had to use an m3 spacer on top of an m5 spacer.  I can modify the file for m4 heatsets if requested. 

Deck panel modified for a better fit, and cable ports. Two different deck panel mounts, above the deck and flush.

Base panel created, I printed in one piece, on a large enough printer.  It's got hexagons, for (hopefully) added stability, and holes for m3 heatsets.  I used these for mounting the DIN rails, since I bought the wrong size.

Slightly modified the front/bottom joints, to fit the screws I had on hand (m4x8, I think).

I also wanted to document that the z mounts need the spacers, otherwise the leadscrews can collide with the toolhead.  I've modified these slightly, to make them a touch taller, for the the screws that I had on hand (m3x sadly don't remember).