This drawer unit is designed for storing the Prusa SL1/SL1S printer vat. The drawer case comes with four feet, which can be used to secure it on top of or under a cabinet, worktop, etc. The feet have an offset on one side, allowing a smaller gap between drawer cases when they are installed side by side.
The drawer can be installed in the case with the feet facing up or down, without any modification. It is large enough to hold the vat with the original Prusa vat cover fitted, so the vat can be stored with resin still inside.
It was originally printed on a Prusa MK4S using PETG. The drawer has a wall thickness of 1.2 mm with 25% infill. For the case, I used a solid structure. Minimal supports are required—only for the drawer handle and for the holes in the feet of the drawer case.
The author marked this model as their own original creation.