Reolink Doorbell Junction Box Cover (4x2) - Larger and with Horizontal Adjustment

Remix of Reolink Video Doorbell PoE Junction Box Adapters/Covers by @vatbrain. 

I made it 2cm wider so it could hide the imperfections of my wall and added a horizontal adjustment for better alignment in case the junction box was a bit misaligned.

---

Original Description:

This is still a work in progress.  I have not yet tested the cover in a real installation.

If you use this, please post a picture of your installation as a “make”.

Allows a Reolink Video Doorbell PoE to be mounted over a single gang junction box (USA).

Requires two #6-32 x ½ inch flat head screws to attach cover to junction box.

The Reolink 15 degree adapter can then be placed on the junction box cover and screwed directly to the wall, or mounted directly to the junction box cover using short #6-32 machine screws and nuts.

Revision History:

250314:   

Added “JBox Cover Cvrd Slot Reolink Video Doorbell POE v21.stl”, which covers the majority of the mounting slots with a thin (0.2mm) layer that can be punched/drilled through where desired. The intent is to help minimize the opportunity for potential water intrusion.

Added “Internal JBox Cover Reolink Video Doorbell POE v14.stl”, which is a junction box cover for “new construction” where the junction box can be covered with this cover and then installed against the exterior wall sheathing from the inside to minimize the doorbell's external footprint. Its primary purpose is to provide two 6-32 threaded inserts to allow the Reolink to be installed using 6-32 machine screws mating with these inserts instead of wood screws. The file “Drill Tmplt Internal JBox Cover… .stl” contains a printable template for drilling holes. The threaded inserts used were purchased from McMaster-Carr:

Remix of Reolink Video Doorbell PoE Junction Box Adapters/Covers by @vatbrain. 

I made it 2cm wider so it could hide the imperfections of my wall and added a horizontal adjustment for better alignment in case the junction box was a bit misaligned.