Metal Dedector Battery Slider

Print:

• Orientation: Flat on back (rails up)
• Material: PETG or ABS (PLA works)
• Layer: 0.2 mm
• Infill: 20–30%
• Walls: 3 perimeters
• Supports: No
• Tolerance: +0.2 to +0.4 mm rail clearance; scale 100–101.5% if tight

Notes:

• Add thin foam inside to prevent rattle
• Check polarity/fit before use
• No affiliation with any manufacturer

Files: STL + STEP

Tags: battery cover, slider, metal detector, replacement, 3D print