12V 1A PSU Module Case

This Case was designed for cheap, yet good quality PSU modules from Aliexpress.

They claim to be able to deliver 1A @ 12V. My tests have shown that my particular model can deliver 1A easily. The built-in over-current protection kicks in at about 1.4A. I advise against overloading a power supply for longer periods of time.

The rectangular hole in the top cover is for am AC-switch. The large hole in the side of the main body of the case is for a socket for a power cord.

Link to socket: https://www.aliexpress.com/item/Black-2-Pin-IEC320-C8-Screw-Mount-Inlet-Plug-Socket-AC-250V-2-5A-6-Pcs/32825464244.html

AC switches: https://www.aliexpress.com/item/20pcs-Lot-Ship-Switch-Black-Ac250v3a2-Pin-On-Off-Wholesale-I-O-Black-Feet-Boat-Switch/32806570916.html

To find it on Aliexpress, search for: "AC-DC 12V 1A Switching Power Supply Module"

Here's one example: https://www.aliexpress.com/item/AC-DC-12V-1A-Switching-Power-Supply-Module-Voltage-Regulator-Switch-Circuit-Bare-Board-SMPS-Monitor/32848946692.html

USE AT YOUR OWN RISK! BE CAREFUL WITH HIGH / LETHAL VOLTAGES!

If you build this project and want to give me something back in return, I'd be extremely happy to see a post under "Makes"! :)

Print Settings

Printer:

Tronxy X8

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

20-30%

Notes:

You might have to rotate the object within your slicing software before printing.