uConsole Antenna Mount

I love having a small deployable antenna on the uConsole, but as the original mount was secured by only one screw, the whole thing pivots easily when articulating the antenna. Additionally, the wire stand has no place to rest and hangs in the air. So I added a bridge to the second screw at the top of the uConsole, solving both issues.

I took measurements from the original model and redid it from scratch, adding a bridge to the second screw to hold the mount in place when folding the antenna. Also, as the antenna I used has a quite thick cable, I made the mount a tiny bit longer to have a bit more space for the bend. Lastly, I added a bevel to make some room for the cable leading back into the uConsole.