Qidi Q2 Door and Lid Handle

New Handle for multi colour 20 Feb 2026

Added another Handle ( Fits Both Door and Lid) using original screws. 13 Jan 2026

Printed in Qidi ABS Rapido Silver, using Qidi Studio with Qidi ABS Rapido Metal filament  profile. 

Printed in upright position using tree supports 

Added 2 new door handles!!!!!

I wanted a bigger door and lid handle for the Qidi Q2 Printer. This is what I came up with for now.

With the door handle I used M3 heat inserts in the handle and M3x15 allen cap screws. With the lid handle I used the screws with which the lid came with, (heads is smaller to try and prevent the ptfe tube not to scratch against it while lid is open)

Printer: Qidi Q2

Filament: Qidi PLA Rapido (purble)

Slicer: Orca

I used the standard PLA Rapido filement Profile

5 walls, 5 top layers, 5 bottom layers, 20% infill  (strength)

Printed with feet down, and tree supports at 29 deg 

Will probably change it again in the future, and add a stepfile

Thanks