Cute Sexy Dice Tower and Tray

This is a fun dice tower derived from my “Frisky Tiefling” miniature figure.  
Drop a bunch of dice into the upper chest area and they come out of one or both legs.

Can handle a fist-full of dice at once. Internal “Pachinko” mechanism ensures randomization of result, slows descent for suspense, makes a nice sound.  Clothing not included, but model has no below-the-belt detail.

Included is a 3MF for the tower and a 3MF for the tray it can be mounted and carried in.
The tower includes engineered support pylons to orient it so that a minimum of slicer-added supports are needed; the pylons break off cleanly and easily (for my printers anyway.)  Snug supports can be used to enable variable layer height.  However, the tower and the pylons are provided in separate STL files as well ( …R2p1.stl and …R2p2.stl, respectively) for those who prefer another approach.

The tray STL and 3MF include liner pieces that can be glued to felt and the excess felt trimmed off to line the bottom of the trays.

More details later.