Fenix HL12R V2 headlamp bracket

Replacement bracket for Fenix HL12R V2.0 headlamp. This model is a bit thicker compared to the included one, with wider headband tabs as well (one of mine broken, that's the main reason the model was created). Angle adjustment is on a stiffer side, but it helps to keep the body in place while moving/shaking head.

Printing instructions

Resolution: ≤ 0.16 mm

Perimeters: 4 or more

Supports: not needed if printed in default orientation. There are 4 built-in thin supports, which should be carefully removed, they are marked on the last picture.

Material: PETG or something similar for better strength 

Contact area with a bed is quite small, so add brim if your bed adhesion isn't perfect.