Twisted Lamp - Stand and Ceiling + variable height and vase mode for shade

Easy to print Lamp in Ceiling and Stand version

Required: Simple E27 Mount / (Medium) Edison Screw, Renovation Socket

Superglue to secure the top/bottom parts to the shade.

Print the lamp shade in vase mode, with the suggested settings: 0.2mm 
0.8 mm for the inner brim, and a 0.15mm distance.
For a smooth finish, set the External Parameters speed to 60 mm/s in the speed settings; otherwise, the speed will vary, and the quality will suffer, especially for transparent filaments   

PLA recommended 

Use the cut feature of the slicer to cut the shade to the desired height! 

For the Top and Bottom Parts, i recommend setting the top and bottom layers to 10, so that no infill is created => to better block light