Modular Picture Frame Kit

Modular Picture Frame Kit

Update 10/11/2025 (Applied corrected files at 14:00 hours)

Added a clip to pin frames together at the sides and/or tops to form a modular system.  Multiple clips can be used on each frame length to increase stability and strength.

There are STLs for 1, 8 and 16 piece sets.

Thanks to @MichalBernad_3630831@MichalBernad_3630831 for the suggestion.

Updated 28/01/2025

Converted files to include metric frame sides - 100mm, 120mm, 140mm, 160mm and 180mm.

With this standard-profile set of parts you can construct picture frames for photographs, etc of 4” x 4”, 6” x 4”, 6” x 6”, 6” x 5”, 8” x 6”, 16” x 12” or any other combination.

The corner and side joiners are a tight push fit so you can take the frame apart and reconfigure it.

Fix the picture in the traditional manner:  Insert glass then mount then picture then hardboard backing and secure with masking tape or similar.

PRINT SETTINGS:
PLA, PTEG or ABS

Layer height:  0.2 mm
Infill:  10%
No brim, skirt or supports required

POST PRINTING:
None

Regards, Paul