Instagram Frame

Show your Instagram post to the world. This is a picture frame for your most favorite photos. (And with the most likes). You can also upload an Instagram post of the Instagram post in the Instagram picture frame :)

You will receive three parts: The front, the back and the stand.
Use the STL files to modify your own Instagram frame or just use the sliced versions.
When do you want to slice the files by your self, take notice of the orientation of the models, the heights for the color change (no MMU2S necessary) and use the support structure for the front frame at the slicer. I used 0,2 mm Layer heigt for the frame and 0,3 mm for the stand.

Picture Size: 100 mm x 80 mm

After printing of the front frame, you can remove the tiny support structure. It's a bit tricky, but it works. After printing the back frame, maybe the stand and preparing your picture with the right size, now you can bring it together. Insert your picture into the front frame and close the front frame, by using the back part. You can clip the backside into the front side. You can also use a glue stick, for better result.

And you are finished.

I'm curious about your Instagram Post, about your Version of the frame and the pictures inside. Show it and share it to the world :)

You will find here the Instagram post in the frame, from the upper pictures: https://www.instagram.com/daniel.dueck/