Bosch PEX to Siemens vac adapter

This is a remix of my jigsaw to vac adapter. Now it connects a Bosch PEX 400 AE orbital sander to a Siemens houshold vacuum hose. The adapter isn't strict to that particular device. Other tools and vacuums could be compatible. Check pictures for reference.

Print instructions

• print with the vaccum side on the bottom
• PLA works good for that ( I used PolyMaker polyTerra forest green), PETg, a hard TPU might be a better choice … (let me know through the comments what material you use and how it performs)
• 3 Perimeters
• 10% honeycomb infill
• perhaps use some painton support for the bottom overhang. not realy neccessary, but will be better

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.

siemens part is the same as original, Bosch PEX part is new