Cable Management Box

Cable management box to store surge protectors and tidy up cables.
405
2256
15
11 k
updated October 23, 2023

Description

PDF

M E G A • U P D A T E • 09/27/2023

Added v2 with cantilever clips for an all printed design, no M3 screws needed! 

There is a slot for M3 screws next to the clip opening as a backup should you have issues with the clip so you don't have to print a whole new M3 screw fastener version.

Update files are available under the v2 folders. M3 screws v1 version still available if you're into M3 screws. 😃 

Also added more sizes! If you need a specific size, let me know in the comments and I'll see what I can do.

 

D I M E N S I O N S • (Length x Depth x Height) in inches

Use the following sizes for reference in the folder labels.

Average size of cable organization box on the market

  • (SIZE R) 15.7 x 5.8 x 5.3
  • (SIZE RS) 15.7 x 3.94 x 5.3

Fits MK3/MK4 build plate

  • (SIZE MK3) 9.8 x 5.8 x 5.3 
  • (SIZE MK3 S) 9.8 x 3.94 x 5.3

Fits PRUSA XL build plate

  • (SIZE XL) 14.1 x 5.8 x 5.3

Bigger Version --→ https://www.printables.com/model/456383-cable-management-box-v2-cantilever-clip-fasteners-

 

H I G H L I G H T S

  • Eight variations included. 
  • Full version if your printer is big enough. 
  • Sliced version (v1 and v2) for the average printer. 
  • For v1, combine sliced box with at least 12mm length M3 screws(x3) and nut(x3). There's also a slim sliced version that's 100mm wide if you want a narrow box. 
  • No M3 screws needed for new v2 cantilever clips version. Though there is still a slot for M3 screws in v2 version just in case.
  • Two 250mm long version (Regular 147.32mm depth and SLIM 100mm depth) to fit MK3/MK4 printers.
  • (v1) Lid doesn't need to be attached together, the separate lid pieces can just be placed on top. You can glue the lid pieces together if needed.
  • The same lid end can be printed twice and use for both ends. This applies for both v1 and v2.

 

If the fitment of the clip is a little loose or tight, you should be able to scale just the clip to get your desire fit without reprinting the whole container.

**Test pieces included to check cantilever clip fitment. Print Base Right TEST, Base Left TEST, and two clips to check the fitment of the clips before printing the complete box.

Tags



Model origin

The author marked this model as their own original creation.

License