BTT BigTreeTech angle extrusion mount for pi tft 70 touch screen and Raspberry Pi

Prints as-is without much difficulty, virtually any printer should be able to handle the overhangs etc. Some bridging required.

Should be printed in PET or ABS for strength, ideally, but for short term use PLA will work.

Includes a cutout for a 4040 fan to blow air across the back of the screen and the RPi board.

See the following for the specs on this device:

https://github.com/bigtreetech/BIGTREETECH-TouchScreenHardware/tree/master/BTT%20Pi%20TFT70%20V2.0%20Github