Laundry sink wall mounting bracket

Recommended print settings:

• Material:  PLA/PETG
• Layer Height: 0.20 or less
• Infill % : 15
• Supports: No
• Print Orientation: Default per STL

Print one for the left side (LH), one  for the right side (RH) - they are the same part, but mirrored.

Background: This laundry sink has mounting holes in the feet, so the sink can be fixed to the floor. My laundry area has a tile floor, so I can't use the feet to fix the sink in place.

This design clamps the top of the sink against the wall - the bottom of the sink is fixed by the drain connection.

I used drywall anchors to mount the bracket to the wall.

Use the bracket to mark the hole, then drill and attach - the angled features clamp the sink in place.

Future considerations: One screw seems strong enough for intended use, but if it pulls out of the wall, I'd make the bracket longer vertically, and add a second mounting hole.