MORPHIUS - SOVOL SV08 NEBULA EXTRUDER LIGHTWEIGHT INSTALLPLATE + DRAGCHAIN CARRIER ADAPTER

This is a mod to use the Nebula Extruder for the Sovol Sv08. I tried to stay as much as possible at the original design and parts. As this is still in development I need your support! 

This mod works! 

BUT as I'm trying to make it perfect I need you guys to help. Go and Remix it if you see something that could be optimized. 

The Fan Cover Printhead face is also a still in development state. The magnets do their job. They are really strong. But due to the EDDY Probe I do not have enough space actually for the magnet. So I'm checking actually if I can replace the Eddy somewhere else to have enough space for the magnet on the face. 

The current state in the file is used to only have a magnet at the installplate and a sheet of metal either printed inside the file or just glued on it afterwards. As I'm telling you, it's still in Progress, but works well so far. 

Later on, I'll also send you the information what has to be changed in the Printer.cfg but you can also google it or check the github of the NEBULA Extruder. 

It's recommended to use at least ASA for this print. The Printhead and surroundings are placed in a warm area and carrying the hotend. So you really should use materials that are heat resistant. 

Kind Regards!

****************************************************************************************************************

18.11.2025 - UPDATE

Added Reinforced MORPHIUS_NEBULA_lower_fix_V2

Added Reinforced MORPHIUS_NEBULA_upper_fix_V3

Both files are improved and reinforced for more stability and more space for cable management.

****************************************************************************************************************

BOM

Glue

https://amzn.eu/d/dlu8sjE

Magnets

N52 6x3 Standard

https://a.aliexpress.com/_EH8pP60

Heat inserts

M3x5x5

M3x6x5

Screws

All from the original Printhead. I'll list them later. 

Material 

I've used ESUN ASA - it's up to you.