CNCKitchen Insert Removal Tool – Gridfinity Holder

A compact Gridfinity-compatible holder for the CNCKitchen Insert Removal Tool. Prints with no supports. Please post a Make with your print and setup!
I got tired of hunting for my CNCKitchen Insert Removal Tool.
So I designed a dedicated Gridfinity that keeps everything in one place, always ready on the workbench or in my drawer.

This module gives you:

• A dedicated dock for the CNCKitchen Insert Removal Tool (the ring).
• A place for the 5x3 (m2, m2.5, m3) screws.
• A small footprint so it doesn’t steal desk space.
• A Gridfinity base so it fits into the rest of your storage system or just sits on its own.
• Both STL (ready to print) and STEP (for remixing).

Print settings (what I used / what I recommend)

• Material: PLA or PETG. PLA is totally fine here because the part is just an organizer, not a functional high-temp tool.
• Layer height: 0.2 mm.
• Infill: ~15–20% (Grid/Cubic/etc.).
• Perimeters / walls: 2–3 perimeters are enough.
• Supports: No. The model is designed to print support-free.
• Orientation: Print it upright as shown in the photos – flat base on the build plate, pockets facing up.

Please share your Make 🙌

I’d really love to see:

• Your color / filament choice
• How you filled the pockets .
• Any remixes (extra rows, lids, magnets, labels, etc.)

Posting a Make helps other people dial in their slicer settings, and it helps me figure out what version / expansion to design next.
If you do print it, PLEASE upload a Make with at least one photo. It means a lot.

Used the template for the box