AMS Shelf Connector Bracket

Why Print This: 
I designed this as I ran into interference issues with the standard cross brace and the AMS lid, which prevented me from fully opening the AMS lid. This bracket allows the bottom and top side plates to stay connected together without the use of the problematic cross brace.

This print allows for easy removal of the AMS stack without the plates from coming apart as long as you print and attach the brackets on all 4 sides.

I will probably still recommend printing the cross braces for extra stability, however I have not needed to use one in my experience, I may make an additional model that helps provide extra stability if there is a desire for it.

Print Settings:
Pretty sure you can use whatever settings you want, but I used a 0.16mm layer height, with 2 walls and 15% infill. I used regular Creality PLA. 

Happy Printing!

This is a smaller connector brace/bracket, compared to the cross brace that the original model comes with.