Milwaukee Brewers Hype Chain (Single-Color Print)

This is a remix of Jackson's 3D World's model, Milwaukee Brewers Hype Chain optimized for single-color printing for those without AMS printers or who are just looking to cut down on waste! Permission for posting remix was graciously given by @Jacksons3DWorld in the comments of his original model. 

Print Instructions:

• No supports needed, standard printer settings used on my Ender 3 Pro (20% infill, single layer walls, etc.)
• Recommend printing 30x of the hype chain links, half in blue and half in yellow but feel free to adjust as you see fit for size
• PLA color recommendations: Print in pictures was made with Inland Dark Blue PLA+ and Inland Yellow PLA Pro (normal PLA will work fine; used what I already had!)
• Note: If you need more detailed instructions, Jackson's 3D World has great information on his original model, including a YouTube tutorial video!

Post-Print Instructions:

• Yellow and Blue parts of the logo are best combined with superglue 
• Recommend white acrylic paint for center baseball part of logo; do several layers letting it dry between applications

Note: I decided for simplicity to just paint the yellow baseball in the center of the mitt using some white acrylic paint I already had, but if anyone wants to print that part out too let me know and if I'm not too busy at the time, I will try to accommodate and make that part too!

Took an AMS print and redesigned to break apart component pieces so they could be printed out separately based on color.