Diecast HotWheels blister pack wall hanger

Printed from cool white PLA, with auto-generated support inside overhangs. The support is easily removable with a knife (be careful).

I also recommend using an outer brim or mouse ears for better adhesion to avoid warping of the corners.

Hanger cam be mounted directly to the wall with 2 screws (⌀3mm) or using a flat bar, like in the photos.

Added two types of hooks - if you want to stack/couple the hangers – see the main photo.
I mounted it on a 2 mm thick aluminum bar. The aluminum bar is offset 3 mm from the wall with spacers. Hopefully everything is clear from the photos :)


For blister with 11cm width.

UPDATE: December 24, 2025 - added model (ver.2) with improved details for easier inserting of blisters into the holder

☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus15  ❤