Raspberry Pi4/5 or any SOC Computer VESA 100/75 Mount

Details

Get yourself stet up with a Linux Smart TV of any kind like with Kodi (LiebreELEC or OSMC is recommended over Raspbian), Plex, or even just Raspbian or Ubuntu for Pi5 with this mount, may not work with PINN.  Get the cables nice and organized with the included strap points and a 2.5in SSD mount for SATA or M.2.  Diverse options, mount via the M2.5 screws or use the case tabs.  Use the Velcro holes to mount a M.2 enclosure or screw a SATA SSD in.

Material:

PETG or ABS is recommended due to the flexibility, but PLA+ should work just as fine.

Reinforced with modifiers to provide strong holes and mounts.

Features:

SSD mount for SATA 2.5in SSD (or HDD) or M.2/mSATA enclosure.

Pi Mounting Holes

Pi Mounting Tabs

Optional SD access point

Optional Cable mounting points (May not fit all printers)

Various dimensions settings

Parametric

Modify the features of this model on OnShape to make it work for you!  Just download as an 3MF, assemble, and change the modifiers to modifiers to increase infill.

Pi SSD Support

The Pi4 supports booting off of an SSD using a USB adapter with a firmware update.   However, some adapters have a driver bug with UASP and need to be disabled, for example JMicron adding this line to cmdline.txt: usb-storage.quirks=152d:0578:u.  

Issues

Holders are a bit too big/tall for some 3d printed cases or you could change that on OnShape.