Stackable Drinking Cup

This is a nice curved stackable drinking cup.
I've made it with prusament petg and it survives the dishwasher.

I've used the following settings to make it water-tight:

• Ironing - Important to make the floating bottom water tight!
• In filament settings
  • Upped extrusion multiplier to 1.05
  • Upped nozzle temp for layers after first layer to 260c
• 15% “Infill/perimeters overlap”
• 4 perimeters for walls
• 7 top layers and 6 bottom layers
• 100% infill
• I've enabled “Fill gaps”

To achieve the fuzzy look in the picture I used the “Fuzzy skin” feature (Outside walls, 0.3 thickness, 0.3 point distance) and I love it! It looks and feels really good.

In the files you can find a simple STL, a 3MF project file with all the settings, and gcode for the MINI+.