10 inch 1U 8x2.5" SSD Hotswap Drive Bay

10 inch Hotswap Drive Bay for Mounting up to 8 2.5" SSDs in 1U. SSDs can be up to 8mm thick (Some slim HDDs should also work).

8 SATA connectors with Cables oder 8 SATAto SATA Adapters (see last two Pictures) can be pushed in the back and secured with 4 m3x40mm BHSC (SHSC can work to but stick out to far). The Back can be mounted to the front with 4 m3 screws (8-16mm).

For SATA Connectors with Cables choose “Back - Cables”

For SATA to SATA Adapters choose “Back - Adapters”

A 40x10mm fan can also be mounted between the front and the back

The Drive Bay can also be used without the Back and different Cables, but without hotswap.

10" Rackmound Drivebay. SSDs are turned around.