Nozzle Box

Please read the description of how to print this box

Print instructions

The file nozzle-box-new.stl contains several parts.

• If you want the box to be smooth on the top (without labels) you can just open it in your slicer and print it.
• If you want the labels on the top to be engraved, you need to split the file into parts (in your slicer) and delete the parts 3 to 15.
• If you want the labels on the top to be printed in a different color, you need to split the file into parts (in your slicer) and generate two gcode files out of it. One with the parts 1, 2 and 16 and one with the parts 3 to 15. Print the file with the part 3 to 15 first (WITHOUT SKIRT!), change the filament and then print the other one.
  
  The labels are low enough that there is no problem with mesh bed leveling.

I recommend printing with a 0.25 mm nozzle, so the labels on the inside of the box are printed properly.

The pre-sliced files are for printing with a 0.25 mm nozzle, with the labels on the top in a different color and with a color change for the labels on the inside of the box.