3D Printer Spare Parts Storage Cabinet Gen 1.0- U.S. Army (Old School) Theme
Description
This is the Rat Rig Themed Version. Other available versions are:
I do custom logos if you want your business logo on the sides. Message me for more information. Thanks.
If you like this design, Please click "LIKE". Thanks
This design is a Work-In-Progress as I am still adding more components and cabinets with other logos. I designed this storage cabinet to be spacious enough to house all your smaller spare parts for your 3D printer.
The bottom drawer is 60mm tall and the other 3 drawers are 40mm tall. There are numerous sizes of the drawer inlays to mix and match the drawer layouts to achieve the setup you need. I have included plain drawers as well as drawers with grids. The inlays come in two depths, 26mm and 51 mm and are stackable in the bottom drawer. The drawers have a grid pattern to hold the drawers in place. I have also included drawers without the grid pattern if you need that.
Some .STEP files will also be included here.
How to read the file descriptions:
1x1-26 Inlay: 1 wide x1 deep grid size, 26 mm tall, No label;
2x2-52 Inlay: 2 wide x 2 deep grid size, 52 mm tall
The 3D Printer Spare Parts Storage Cabinet - Bambu Labs Themed can be found HERE
The Long Handled drawers can be found HERE! FREE Download
The Standard drawer inserts can be found HERE! FREE Download
The BamBu Labs Custom drawer inserts can be found HERE! FREE Download
The Gridfinity Drawer Set can be found here. FREE Download!
The Gridfinity Replacement Drawer for 3D Printer Spare Parts Cabinet V1 can be found HERE! FREE Download
If you print more than 1 cabinet there is a spot in the top that can be punched or drilled out to bolt them together.
P.S. If you have made this purchase and you have a request, feel free to contact me to submit the request.
Thanks for your continued support!
3D printing settings
Finished Size: 210 width x 210 depth x 190 height
Printing Orientation:
Cabinet - on its back with No Supports - To do the LOGO you will need a multi color printer. To color the themed logo in, load Main Cabinet into slicer and paint the impression. There is enough of an impression for the slicer to do edge detection.
Drawers - bottom down - Supports
Inlays - bottom down - Supports
Handles - top down No Supports
Recommended Printer Settings:
Infill - 10% cubic or Gyroid
Material - Any
Parts:
Fasteners Needed: 8 - M4x10 or 12mm
Feet: Any rubber screw on feet will work if you want feet. Here is an example (https://www.amazon.com/dp/B08PCF9VQ1?ref=ppx_yo2ov_dt_b_product_details&th=1)
Quick Video Overview:
Tags
Model origin
The author marked this model as their own original creation.
