shadow box display case picture frame (4.5" x 6")

Slightly adjusted model of a previous print (see remixed model).

This model has better clearance for the glass, and does not have holes in the back piece like in the picture. You'll need to adjust the model (or drill the holes) or just print without holes if you don't need them!

---

A shadow box/display case/frame for items such as pins or anything up to ~9mm thick.

Top/Mid/Bottom pieces join together with magnets making it easy to assemble and assemble. Magnets are ~1.7mm tall x 6mm diameter, secured with a drop of crazy glue - 1 on each corner for a total of 16 magnets (make sure they're aligned properly!).

Backing is unique to a pin so you'll need to design your own (or use something else).

Modeled for a pane of glass that measures 1.8mm x 113.60mm x 151.70mm (about 1/14" thick (I guess?) x 4.5" x 6").

Print in photo was printed in Prusament Galaxy Purple and Prusament Pink to match a specific magnet.