Snackbox Micro Case Large

This fork is a remodel of the original. I designed it to fit my own needs specifically.

The print has been resized and adjusted to fit a 256x256 print bed without having to split the project in 2. The surface area has instead been made larger from the bottom, giving the users palms ample space to rest on.

The options buttons have been made a lot larger, I personally hate the stock buttons because they're like little needles for your fingers, so I made them larger.

The project has a few new inclusions, primarily keycaps. Depending on your printer, it might be better to use the stock keycaps, because the prongs connecting to the Kailh switch are fragile and can easily snap off from overuse. 

I printed my box using eSUN White PETG on a stock Centauri Carbon with a 0.4 nozzle using Orca Slicers default eSUN PETG options. Specifically 0.16mm Optimal. I printed all buttons on 0.12 Fine.

I don't like using screws for 3d printed parts so I disregarded the screw version and instead used the magnet SF case as a base, while removing the SF case modifications. It's still using the 3x6 magnets.

If you run into any issues or want something changed, send me a message. I plan on working more on this project regardless. Hmu if you're into PCB design.

The model has been almost entirely remodelled. Changes listed below:
- Larger surface area
- Larger options button pegs
- Added Keycap files
- Sturdier switchplate
- Thicker and sturdier design
- Added clips for a USBA to USBC cable