spectrum • planter

spectrum · planter

modern minimalist design with patterns with a screw-in plate for drainage

dimensions in mm:

• 100mm height version  ~ x:110 · y:110 · z:100
• 80mm height version  ~ x:88 · y:88 · z:80

important · make sure that:

• your filament is dry and calibrated so that it deals appropriately with printing the patterns and the tolerances on the threads
• your build plate is properly clean so that there aren't adhesions issues and lifts during the print
• the planter requires supports to print cleanly, i highly recommend to use a non bonding material as an interface layer - in this case planter is PLA and the interface layer is PETG, and the print profiles are configured as such. If you choose not to have a different material as support interface you'll need to adjust the support settings accordingly, and ensure you clean-up completely after support removal to ensure the thread locks into place

photos show printed in matte and marble brick PLA

• .40mm nozzle
• .2 layer height
• 10% cubic infill
• supports on the planter with PETG as interface layer and settings adjusted accordingly

notes

• includes bambu studio 3mf files and STLs
• all photos uploaded are of the actual printed model, and are copyright protected
• if you enjoy this model please consider to buy me a coffee
• commercial licence membership available on the link below or on my patreon