Little Boy Atomic Bomb Display Model

I uploaded an update "LB Upper Half 2 B.stl" after feedback. It was missing an indentation that would have allowed to fit in another part. My apologies.

Please enjoy this second of two projects I put together. Like the first model (Fat Man Atomic Bomb) I created this model based on some drawings, photos, and descriptions. I recommend supports for "Lower Half 1". Everywhere else, use as you see fit.

I printed and tested and finished a version (I'll upload photos, later), made a few corrections.

For the Small Parts and the Nose Cone - I recommend .15
For the Main Parts & Tail Assembly - I recommend .2 or finer

This is a smaller model to Fat Man (proportional and accurate to each other) - so you can print at lower resolution, but I think it is worth printing at finer resolution.

Because some parts are small, I modeled them about 15% larger in order to get quality resolution.

Please let me know what you think. Thank you.

Print instructions

Rafts:
No

Supports:
Yes

Resolution:
Varies .15 for small parts, .3 for larger parts

Infill:
5% Cubic

Notes:
For supports I recommend overhang threshold of 10.