Ritual Washing Cup

If you don't know what this is, you probably don't need one...
4
34
0
309
updated June 4, 2023

Description

PDF

…if you're still curious, https://en.wikipedia.org/wiki/Handwashing_in_Judaism is a good place to start.

Printing Instructions
  • You want this to hold water and not leak, so may need to be generous in top, bottom and side thickness.  I set all of these to 2 mm
     
  • You don't need supports, but the bottom of the letters will be cleaner if you put supports there.  How much it matters depends on the quality of your printer and your choice of material
See Also

If you're curious about what an Exshtender™ is, https://www.shapeways.com/product/GBT4GCGWE/exshtender-v5-20 has a good description, including a link to a video of how to use an early version. https://www.treatstock.com/3d-printable-models/3659837-exshtender-v539 tends to be cheaper.

Tags



Model origin

The author marked this model as their own original creation.

License