Green Dolphin Street Prison Cuff - Jojo 's Bizarre Adventure Part 6 : Stone Ocean - FDM

Who volunteers to go to the farm?

The proximity cuff used by the Green Dolphin Street Prison, perfect for a Jolyene, Hermes, or Foo Fighters Cosplay! Careful, don't stray too far!

RightSideCuff x 1

LeftSideCuff x 1

GreenDolphinLogo x 1

BarAccent x 1

AlignmentPin x 2

To have a satisfying click closure, you will need six 3mm x 1mm magnets, easily purchased off of e-commerce sites. A straightened paperclip wire, cut to length was used for the hinge. This cuff fits my slim 50mm in width wrist. If the cuff is scaled up the magnets will still fit, just won't be snug.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.20

Infill:

10%

Filament: Overture PLA Silver

Notes:

Be careful when adding the supports so that you don't clog the hinge part.

Post-Printing =============

Assembly:

Needs: Wire for the hinge (I used an unfolded paperclip)

Optional: Six 3mm x 1mm neodymium magnets glued into the recesses with the aligned opposite polarities.

Category: Costume