Sperax walking pad angled feet

Feet for the bottom of a Sperax vibrating walking pad to increase the angle of the pad.

I have a model Sp-ca-01, I don't if this would work for any other model of walking pad.

You can find a link to a parameterized onshape part here.

The Grade percent is what's embossed on the sides, to find the grade in degrees if you want to create your own, enter the percent that you want in this calculator.

I used 4 walls at 0.2mm layer height, and 15% cubic infill in Orca and found that to be more than strong enough. You could probably drop to 10% and 4 walls and be fine realisticly