Remote Holder with Optional Accent Piece

Triple Remote Holder with Optional Accent Piece

This remote holder is designed to hold three small remotes.
The model has been optimized for printing with a 0.4 mm nozzle to reduce print time, minimize filament use, and ensure reliable results without sacrificing strength or appearance.

📏 Dimensions

Maximum remote size thickness: 42 mm × 24 mm

⚙ Print Settings

• 3 walls
• 5 bottom layers
• 5 top layers
• 25 % aligned rectilinear infill

💡 Helpful Tips

You can customize your holder by adding an accent color piece, which slides over the main body with a snug friction fit.

• When installing the accent piece, it’s recommended to apply a small drop of super glue at each end after sliding it into place.
  - Gently pull back the edge just enough to apply the glue — avoid pulling too far, as the piece may crack.
• If you print the main body with “Fuzzy Skin” and plan to add the accent piece, expect an extremely tight fit.
  - The accent edges may flex slightly outward — this is normal. Apply a small drop of glue, press or clamp the parts together, and hold until the glue cures.
• When printing the Accent piece, use a brim or mouse ears to help prevent warping.