Oval / Oblong Plant Drip Tray - OpenSCAD
A plant drip tray for oblong shaped pots. Customizable using OpenSCAD
0
2
0
9
updated
October 17, 2025
Description
PDFWe have a houseplant with an oblong shaped pot. I wanted to put a drip tray underneath it to avoid moisture seeping on to the wood table it sits upon. This drop tray is a rectangle in the middle with two semi-circles at each end. It is parameter driven so it can be readily customized to fit your needs.
Model Parameters
| drip_tray_width_x | Width of the drip tray. |
| drip_tray_length_y | Overall Length of the drip tray inclusive of the circular ends. |
| drip_tray_height | Lip height of the drip tray. |
| wall_thickness | Wall thickness of the drip tray. |
| drain_rib_height | Drain ribs height that creates a gap between the pot and the drip tray. |
| drain_rib_size_y | The size of the drain rib in the y direction. |
Customization and Dependencies
This model is built using the tools listed below. Install these tools and you can open up the SCAD file in this repo to create your own printable object.
The source code is uploaded here, however you can also get the latest source code on the Oval Plant Drip Tray GitHub repository.
The STL file that is uploaded here is 160x75x10 mm to fit our pot.
Tags
Model origin
The author marked this model as their own original creation.
